Community VERIS 6 - Single 6" Two-way Full-Range Loudspeaker The VERIS 6 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. Compact but powerful, it is ideal for distributed systems such as those found in cafes, restaurants, shopping centers and airports. When paired with a subwoofer such as the VERIS 210S, a VERIS 6 system will produce high-fidelity, broad spectrum sound that belies its modest size. In addition to distributed systems, the VERIS 6 is an excellent choice for ancillary delay applications. When used to augment a FOH system in such venues as auditoria, theatres, and houses of worship, delay speakers can significantly even-out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying VERIS 6 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The VERIS 6 may be mounted to a wall or ceiling surface with a yoke bracket (included), suspended from its M6 threaded rigging points, or installed using an OmniMountTM Series 30 mounting device. Applications - Restaurants
- Pubs
- Cafes
- Worship Centers
- Shopping Malls
- Airports
- Delay Fill
Features - Internal DYNA-TECH Dynamic Protection
- Black or White Finish Available
- Ferrofluid Treated HF Driver for Improved Heat Dissipation
- Non-Resonant, Non-Metallic HF Diaphragm for Reduced Distortion
- Carbon Ring Cone Technology Provides 30% more piston area with Increased Excursion Capability
- Terminal Strip and NL4 Compatible Connectors
Recommended Power:
| 200 - 300 WRMS at 8Ω | | Recommended High-Pass Filter: | 100 Hz - 24 dB / octave or higher |
Specifications | | | Format: | Two-way full-range, vented bass, trapezoidal enclosure | | Operating Range: | 100 Hz - 18 kHz | | Frequency Response: | 125 Hz - 10 kHz (± 3 dB) | | Dispersion (-6 dB): | 90º H x 70º V (in vertical position) | | Maximum SPL @1m: | 110 dB continuous / 117 dB peak | | Crossover Frequency: | 2 kHz | Sensitivity in SPL:
(1W/1m free-space) | 90 dB (125 Hz - 10 kHz, 1/3 octave)
90 dB (250 Hz - 4 kHz, speech range) | Max Power Handling:
| 100W RMS (28.3V)
250W Program / 500W Peak | | Impedance: | Nominal 8Ω / Min. 6.5Ω at 7.7 kHz | | Connectors: | Terminal Strip and NL4 Compatible | Transducers | | | Low Frequency: | 6" (152mm) 100W RMS
250W Program, 8Ω | | High Frequency: | 3/4" (19mm) 50W RMS
125W Program, 8Ω | Mechanical | | | Enclosure: | Trapezoidal (22.5º included angle) 11-ply cross-laminated birch | | Finish: | Black or white catalyzed polyester paint (specify at time of ordering) | | Rigging Provisions: | (9) M6 threaded rigging fittings (100 lbs / 45.4 kg per point in straight line, 10:1 safety factor.)
(4) M6 threaded fittings for OmniMountTM 30 bolt pattern; yoke bracket included | | Grille: | Powder coated steel, black or white | | Dimensions:H x W x D | 15.5" (395mm) x 9.8" (249mm) x 10.1" (258mm) | | Net Weight: | 16.5 lbs / 7.5 kg |
|
