Crown CTs 2000 - 2000 watt total, Professional Power Amplifier | Church Sound Systems Audio Equipment Installations

Crown CTs 2000 - 2000 watt total, Professional Power Amplifier
[CRO/CTS2000]

$2,431.00

Quantity:

Crown CTs 2000 2-channel 2000 watt power amplifier

Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.

High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
Crown Switching Power Supply for lighter weight
Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
100V direct outputs on CTs 2000 & CTs 3000
Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
Comprehensive array of indicators provide accurate diagnostics
Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.

Rear
Click to Enlarge

Specifications

Minimum Guaranteed Power (20 Hz - 20 kHz)	CTs 600 Power at 0.1% THD	CTs 1200 Power at 0.1% THD	CTs 2000 Power at 0.35% THD	CTs 3000 Power at 0.35% THD
2-ohm Dual (per ch.)	150W	250W	1000W	1500W
4-ohm Dual (per ch.)	300W	600W	1000W	1500W
8-ohm Dual (per ch.)	300W	600W	1000W	1250W
16-ohm Dual (per ch.)	300W	300W	625W	625W
70V Dual (per ch.)	300W	600W	1000W	1500W
100V Dual (per ch.)	300W*	600W*	1000W	1500W
4-ohm Bridge	300W	500W	2000W	3000W
8-ohm Bridge	600W	1200W	2000W	3000W
16-ohm Bridge	600W	1200W	2000W	2500W
100V Bridge	600W	1200W*	2000W	3000W
140V Bridge	600W	1200W	2000W	3000W
200V Bridge	600W*	1200W*	2000W	3000W

Performance	CTs 600	CTs 1200	CTs 2000	CTs 3000
Frequency Response (at 1 watt, 20 Hz - 20 kHz)	± 0.25 dB
Signal to Noise Ratio (ref. rated power, 20 Hz to 20 kHz, A-weighted)	< 105 dB
Total Harmonic Distortion (THD) at full rated power, from 20 Hz to 20 kHz	< 0.1%	< 0.1%	< 0.35%	< 0.35%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from –40 dB to full rated power	< 0.1%	< 0.1%	< 0.35%	< 0.35%
Damping Factor: 10 Hz to 100 Hz	> 3000
Crosstalk (below rated power) 20 Hz to 1kHz	> 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz, typical)	50 dB
DC Output Offset	< 2 mV
Input Impedance nominally balanced, nominally unbalanced	10 k ohms,5 k ohms
Maximum Input Level Before input compression Absolute maximum	+20 dBu + 32 dBu
Load Impedance (Note: Safe with all types of loads) Stereo Bridge Mono	2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V, 140V and 200V	2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V, 140V and 200V	2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V, 140V and 200V	2, 4, 8, 16 ohms, 70V, and 100V* 4, 8, 16, 100V, 140V and 200V
Voltage Gain (at maximum level setting) 8/4 Ohm Operation 26 dB 70V Operation 100V Operation	35:1 (31 dB) 20:1 (26 dB) 50:1 (34 dB) n/a	50:1 (34 dB) 20:1 (26 dB) 50:1 (34 dB) n/a	63.9:1 (36 dB) 20:1 (26 dB) 50:1 (34 dB) 50:1 (34 dB)	71.4:1 (37 dB) 20:1 (26 dB) 50:1 (34 dB) 50:1 (34 dB)
Input Sensitivity 2/4/8 ohms 70V 100 V 26 dB gain	1.4V 1.4V n/a 4 ohm: 1.74V. 8 ohm: 2.46V	1.4V 1.4V n/a 4 ohm: 2.46V. 8 ohm: 3.47V	1.4V 1.4V 2.0V 4 ohm: 3.17V. 8 ohm: 4.48V	1.4V 1.4V 2.0V 4 ohm: 3.88V. 8 ohm: 5.01V
Required AC Mains (+15%, – 25%)	120V/60 Hz, 230V/50 Hz
Power Draw at Idle (120 VAC mains)	24W (Standby Mode)	24W (Standby Mode)	35W (Standby Mode)	35W (Standby Mode)
Overall Group Delay	< 120 usec
Cooling	Continuously variable speed forced air, front-to-back airflow
Dimensions Width Height Depth	19 in. (48.3 cm.) 3.5 in. (8.9 cm.) 14.25 in. (36.2 cm.)
Net Weight Shipping Weight	22.8 lb (10.3 kg), 27.7 lb (12.6 kg)	23.4 lb (10.6 kg), 28.3 lb ( 12.8 kg)	27.0 lb (12.2 kg) 32.0 lb (14.5 kg)	27.7 lb (12.6 kg) 32.7 lb (14.8 kg)

* With T-170V or TP-170V.

For more information, please visit this products webpage.

This product was added to our catalog on .

Quantity: