XDS95 Stompbox 24-bit Digital UHF Wireless Instrument System
On the Floor - Portable Digital UHF Wireless
The XDS95 from X2 delivers your tone and performance with the sound and feel of a direct wire connection - all at a price that won't break the bank. Features include: 24-bit digital converters yielding 117 dB dynamic range to capture your most expressive performances without the use of companders, five simultaneously compatible channels, frequency response all the way down to 10 Hz for truly thundering lows, TRS 1/4" output for instrument and full-bandwidth or 'tuner out' applications, and a five segment LED display (battery status, link status, audio level and channel). Operating the system is unlike any wireless you've tried before. Simply connect the transmitter to the source via the 1/8" threaded-collar locking connector and the "stomp-box" style receiver to your amplifier, mixer or pedal-board. Then power up making sure the transmitter and receiver are set to the same channel. That's it. You're ready to go! No knobs to adjust and no antennas to loose or break mean you're up and running in approximately the same time it takes to connect a cable. 
SYSTEM CONTAINS: • Digital UHF bodypack transmitter
• Digital UHF 'stomp-box' receiver
• Instrument cable
• Users guide and all necessary batteries
SPECIFICATIONS: | Frequency Response (± .5dB): | 10 Hz - 12 kHz | Audio Dynamic Range: | Greater than 117 dB | Distortion: | 0.03% THD | Compatible Channels: | Five | RF Output Power: | 10mw | Transmission Range: | 150 feel line-of-site (may be due to local conditions |
Optional Accessories: 
Pro Instrument Cable XC2 XC2 1/4” to 1/8” locking cable (premium Canare wire w/Neutrik + Switchcraft ends) 
The XC3R right angle cable features Canare wire with Neutrik and Switchcraft ends.
Power Supply XAC2 XAC2 9V DC 100mA Power Supply for XDR1
|
