Ashly MX406 - 6 Channel Rackmount Mixer The MX-406 is a rack-mountable six-input, stereo microphone/line mixer. Each input will accept either microphone or line-level signals. If microphones are used, a -20dB pad switch is available. A three-position switch allowing you to set input gain for -20, -40 and -60dB is located on the front panel. Each input has bass and treble shelving filters with individual control of each filter and a level and pan control. A separate Aux input control adjusts line level sources, such as an external processor, CD player or tape deck. Additional front panel controls include: Stereo Aux Input, Aux Master Output, Left and Right Stereo Output and an On/Off Power switch. A Mono/Phones output control allows you to adjust the mono output and stereo headphone output. The Stereo headphone output jack is located on the front panel. Front panel LED indicators include channel clip, Phantom power, AC power and an 11-step LED output level meter. Connections on the rear panel include a combination 1/4” - XLR jack for each input and an XLR transformer balanced mono output. The balanced stereo output jacks are 1/4” TRS. Channel inserts are 1/4” TRS. Left and right Aux In (return) and Record Out are RCA type jacks. A switch turns the 48V Phantom Power for use with condenser mics on and off. Designed and built in the USA, the MX-406 has an all-steel chassis, contains only quality components and has a five-year warranty. 
Click to Enlarge
What's New - Universal switching power supply; operates from 100 - 240VAC, 50/60Hz.
- Outputs are now servo-balanced.
- Power switch moved to the rear panel.
- Panel color has changed from gray to charcoal.
- Inside rack depth is eight inches.
- Power LED is blue.
Features: - Six Balanced 1/4” - XLR Inputs
- Two-Band EQ on Each Input
- Input Level and Pan Controls on Each Input
- Six Channel Inserts
- Aux Input Controls
- Transformer Balanced XLR Mono Output
- Five Year Warranty
General Specifications
| | | EQUALIZATION: | LOW ± 12dB at 70 Hz, shelving.
HIGH ± 12dB at 15 KHz, shelving. | TOTAL HARMONIC DISTORTION: | < 0.008 % @ +4dBu
<0.03% @ +12dBu | | IMD (SMPTE IM distortion): | <0.03% @ +12dBu | | HUM & NOISE (20 Hz-20 KHz noise bandwidth): | < -126 dBu equivalent input hum and noise, TRS Output
< -113 dBu residual output noise; TRS outputs, all level controls at min.
< -98 dBu residual output noise; XLR outputs, all controls at min
< -90 dBu Aux Out; Master Level and one Channel Level at nom.
< -90 dBu Aux Out; Master Level and all Channel Levels at nom.
< -75dBu TRS Out; Master Level and one Channel Level at nom.
< -74 dBu TRS Out; Master Level and all Channel Levels at nom.. | | FREQUENCY RESPONSE: | +0.5/-1.0 dB 20 Hz to 20 KHz. | | MAXIMUM VOLTAGE GAIN: | MASTER
+88 ± 2dB—Mic/Line to Mono Output
+92 ± 2dB—Mic/Line Input to Master Output.
AUX SENDS
72 ± 2dB—Mic/Line Input to Aux Master Output, pre Channel Level
92 ± 2dB—Mic/Line Input to Aux Output, post Channel Level
TAPE/CD IN
+28 ± 2dB—Stereo/Aux Input to Master Output | | CROSSTALK: | < -65 dB, adjacent inputs, 20 Hz--20 KHz. | | VU METER: | Two 10-segment LED meters, L/R, 0 VU = + 4 dBu. | | PEAK INDICATORS: | Peak CLIP indicator on each input channel and left and right outputs,
illuminates 3 dB below clipping. | PHANTOM POWER:
| +48 VDC applied to all MIC INPUTS, switchable on back panel.
Gradual power-up and down to eliminate "pops". | POWER REQUIREMENTS:
| 120 VAC nominal, 50-60 Hz, 15 watts. 93 VAC minimum (240 VAC available) | | DIMENSIONS: | 19” wide x 3.5” high x 6.6” deep. | | SHIPPING WEIGHT: | 10 lbs | INPUTS | | | MIC / LINE INPUTS | Balanced, Female XLR--1/4” TRS Combo Jack | | AUX RETURN | Unbalanced, 1/4” Phone Jack | | TAPE/CD IN | Unbalanced, RCA Jacks | OUTPUTS | | | STEREO OUT (L,R) | Pseudo Balanced, 1/4” TRS Phone Jack | | MONO OUT, | Transformer Balanced, Male XLR | | AUX OUT | Pseudo Balanced, 1/4” Phone Jack | | TAPE OUT (L,R) | Unbalanced, RCA Phono Jack |
|
