Furman M-8x2 Power Conditioner   Description A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8x2 is designed for applications where lights are not required. Features Noise Filtration - AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI) Surge Protection - Spike & surge protection ensures equipment stays safe and your power stays clean 9 Total Outlets - 8 rear panel outlets and 1 front panel outlet 15 Amp Rating - 15 amp rating, with circuit breaker "Protection OK" Indicator - Front panel indicator LED lets you know that your equipment is being protected Wall Wart Spacing Indicator - Rear outlets have been spaced to accomodate even the bulkiest of wall warts and adapters Click to Enlarge Specifications Maximum Output Current: 15 amps Line Cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug Operating Voltage: 120VAC 60Hz Spike Protection Mode: Line to neutral Energy Dissipation: 170 joules Peak Impulse Current: 12,000 amps Maximum Continuous Opterating Voltage: 130 VAC RMS Let Through Voltage (@ 125 amps, 8/20uS waveform) 400 volts Noise Attenuation: Transverse mode: Greater than 26dB, 200Khz to 10 Mhz Dimensions: 1.75” H x 19” W x 7.5” D Weight: 4.9 lbs. Safety Agency Listing: cTUVus Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.